Yes, an apartment can have its own pool or spa, as long as it is planned into the structure from the first drawings. Every cubic metre of water weighs about a tonne, so this is an engineering job long before it is a design feature. In NSW the owner of a pool or spa then has a few legal duties, and your council can tell you how they apply on a terrace.
The structure comes first
A backyard pool sits on the ground. A terrace pool sits on a slab with a home underneath it, and that slab has to carry the water, the shell, the tiles and the people. Add the wet weight of a full plunge pool to a slab drawn for a normal balcony and you have a serious problem, so the structural engineer needs to know about it before the concrete is designed.
This is why a private pool is hard to add to an existing apartment. It belongs in the plan from the start. At a’Maré in Cronulla our record reads “3 full floor luxury residences each with private pools”, and the features include a heated spa on the balcony.
The membrane on a terrace
A leak on a terrace is a leak into someone’s ceiling, so the waterproofing has to be right the first time. The shell is built, the membrane goes on, and it is tested before anything covers it. Every plumbing outlet that passes through the shell is a place water can follow, and each one needs its own detail.
The finish then goes over the top. At a’Maré the spa is finished in Ezarri Spanish mosaics, a small tile made for life under water. Small tiles suit a curved shell because they follow the shape without being cut, and they give a wet floor more grip through all the extra grout lines.
The parts you do not see
A pool or spa needs pumps, filters and a heater, and all of that needs a home. It has to sit where someone can reach it for a service, where the noise will not carry into a bedroom and where the pipe runs stay short. Heated water also uses power, so ask how the heater runs and what it costs to keep warm through winter.
Wind matters too. On a coastal terrace the wind cools the water and blows spray around. Ask to see where the screens and glass sit, and stand there on a blowy day if you can. We talk about what coastal air does to materials in our note on natural stone in a beachside home.
What NSW asks of the owner
The NSW Government sets out these duties for pool and spa owners. The rules reach any pool or spa that can hold water deeper than about 30cm.
- All pool and spa owners must register on the NSW Swimming Pool Register. Registration is tied to the property address.
- A pool must be surrounded by a child-resistant barrier at all times, and gates must stay shut. The barrier has to meet the relevant Australian Standard.
- Some spas can use a securely fastened, child-resistant lid when they are not in use. This depends on the size and function of the spa, so check before you rely on it.
- A new pool cannot be used by anyone until an occupation certificate has been issued.
- When you sell, the contract must include a registration certificate plus one more document, such as a valid certificate of compliance or an occupation certificate from the last three years.
Your local council is the place to ask about your own property. In the Shire, that is Sutherland Shire Council.
Questions for a strata building
Strata adds one more question: who owns the pool? Common property varies from one scheme to the next, so read the strata plan and the by-laws to see whether the pool, its shell and its membrane are part of your lot or part of the building. That answer decides who pays when something wears out. Ask how the plant is reached as well, and whether anyone has to come through your home to service it.
What to look for at an inspection
Look at the coping and the glass, and at how the water line sits against the tile. Ask to see the plant, and ask for the certificates. Then ask the plain question: where does the water go if the membrane ever fails? A builder who has done this before will answer you with a drawing. Our About page sets out who leads our work on site and how we run it.
