A Class 2 building is a building with two or more separate homes in it, which in everyday terms means an apartment building. The term comes from the National Construction Code, the national set of rules for how buildings are designed and built. In NSW the class also decides which extra laws apply, and those laws are the reason a buyer should care about it.

Where the line sits

The code says it plainly: a Class 2 building is a building containing two or more sole-occupancy units. A sole-occupancy unit is a home kept for the people who live in it, to the exclusion of others. Put one home directly over another and the building cannot be Class 1, which is the group for houses. It has to be Class 2 or Class 3, depending on the circumstances.

So size has nothing to do with it. Our 13 level residential tower on Bathurst Street is an apartment building, and so are the 17 residential units we built on Abercrombie Street. Three homes stacked one above another, as they are at a’Maré in Cronulla, fall into the same part of the code.

Why the class matters

Homes stacked together share risks that a house on its own block does not. Fire and sound have to be held back between one home and the next, and water from one bathroom must not end up in the ceiling below. The code sets its requirements around those shared risks, so a home in a Class 2 building is built to a different set of rules from a house.

The extra rules in NSW

NSW added a further layer through the Design and Building Practitioners Act 2020, which applies to regulated buildings. Those are currently Class 2 buildings and certain Class 3 and 9c buildings, including mixed-use buildings. Building Commission NSW oversees the scheme. The main points are these:

  • Practitioners must be registered under the Act to do this work.
  • Regulated designs must be lodged on the NSW Planning Portal before building work starts.
  • Registered design practitioners declare that their designs comply.
  • The building practitioner declares that the work matches the approved designs and complies with the Building Code of Australia.
  • That declaration and the final designs must be lodged before anyone applies for an occupation certificate.

The developer has duties too. The developer must give notice of the expected completion date at least 6 months and no more than 12 months before applying for an occupation certificate. That notice gives the regulator time to look for serious defects before the building is finished. Building Commission NSW can also choose the work for an audit, and serious defects can stop the developer from applying for the certificate at all.

The occupation certificate

An occupation certificate is the last step in the approval and construction process, and you need one to occupy or use a new building. It comes from the local council or a private certifier, and it can only be issued once the building meets the regulatory standards and is suitable for its class.

New apartment buildings of 4 storeys or higher carry one more requirement. The developer must pay a building bond to Building Commission NSW equal to 2% of the total contract price.

What to ask as a buyer

Most of this happens out of your sight, so ask about it directly. Your questions can be simple. Who is the building practitioner on this project, and is the builder licensed? Have the designs been lodged? When is the occupation certificate expected? If you are buying before the building is finished, our note on buying off the plan from a builder-developer covers the contract side.

Our record in Class 2

We are a fully licensed builder in NSW and an accredited Building Practitioner for Class 2 construction, which our credentials describe as general high rise. Apartments have run through our work since 2001, with 108 residential units at Bankstown the following year. We also hold Home Building Compensation Fund eligibility for projects greater than $5 million, and we are a member of the Master Builders Association.

Director Matthew Martino also ran the site on 175 self contained apartments at Macquarie University, a job where FDC was the builder of record. That work gave him experience of apartment construction at a large scale, and today it feeds into the smaller residences we develop and build ourselves.